1.Go to 'Create' tab, click 'Geometry' and create a 'Box'. Set its parameter Length:55, Wide:55, Height:70 and all segment is 1.
2.Convert the box to an editable poly by right clicking it and select 'Convert to an Editable Poly'.
3.Select these 4 edges, and chamfer it with an amount 20 and segment 20.
4.Select these edges, and connect with 10 segment.
5.Select these edges, and connect with 2 segment.
6.Change to a vertex selector. Select these vertexs and scale it in x direction to get its distance more wider.
7.Change to a polygon selector, select these two polygons and inset it with an amount 0.5.
8.Select the first polygon that have inset before, click ‘Hinge From Edge’ modifier from ‘EditPolygons’rollout menu. Sets the parameter : Angle : 170, Segment 14 then pick the hinge, see pic.08.
9.Next we’re gonna connect the handle to a mug body. Pick these two polygons (see pic.09) then click Bridge button.
10.Modify the shape of the handle using ‘select and move’ tool by move the vertex in x-y direction.
11.Select the top polygon of the mug, inset it with an amount 2.5 then extrude it with height -7 for ten times.
12.Select the bottom polygon of the mug, select the edges and chamfer it with an amount 2 and 3 segment.
13. Extrude the polygon with an amount 1.
14. Select the first and second row vertex from the top of mug and scale it. See pic.14.
15. Select an inner edge of a top mug and chamfer it with an amount 2 and 5 segment.
16. Select an inner edge of a mug bottom and chamfer it with an amount 5 and 5 segment.
17. Finish this mug model with turbosmooth modifier with iterations 1. See the result in pic.17.
18. Thats a wrap, see you again in next tutorial.